ISO/IEC 14443 Type B-Compliant
1Kb Memory Fob
1ST BYTE
BIT RATE CABILITY
77h
2ND BYTE
MAXIMUM FRAME SIZE, PROTOCOL TYPE
11h
3RD BYTE,
UPPER NIBBLE
FWI
0110b
3RD BYTE,
BIT 4, BIT 3
ADC
00b
3RD BYTE,
BIT 2, BIT 1
FO
01b
Figure 22. Protocol Info Field Details
SOF
COMMAND
PUPI
CRC
EOF
SOF
INDICATOR
CRC
EOF
50h
(4 BYTES)
(2 BYTES)
00h
(2 BYTES)
Figure 23. HLTB Request Frame
shows where this information is located in the protocol
info field and what the values are.
The bit-rate capability of the MAX66020 ranges from
105.9kbps to 847.5kbps in both directions (request and
response); request and response bit rate need not be
the same. The maximum frame size (upper nibble of the
2nd byte) of any request/response specifies 24 bytes.
The largest frame that occurs with the MAX66020 is 19
bytes (Get System Information response). The protocol
type (lower nibble of the 2nd byte) specifies that the
MAX66020 supports the ISO/IEC 14443-4 block trans-
mission protocol. The FWI code 0110b specifies a
frame waiting time of 19.3ms. Note that a slave may
respond long before the maximum frame waiting time is
expired. The ADC code 00b specifies that the
MAX66020 uses proprietary coding for the application
data field. The FO code 01b implies that the MAX66020
supports CID, but does not support the NAD field in the
ISO/IEC 14443-4 block transmission protocol.
HLTB Command
The HLTB command is the only network function com-
mand to silence a slave by parking it in the HALT state.
If, based on the ATQB response, the master does not
want to further communicate with the slave, the master
issues the HLTB command. Figures 23 and 24 show
the format of the HLTB request frame and the corre-
sponding response frame. The data to be used in the
PUPI field must match the PUPI information that the
slave has transmitted in the ATQB response. While in
Figure 24. HLTB Response Frame
the HALT state, the slave only responds to the WUPB
request.
ATTRIB Command
The ATTRIB command is the only way to select a slave
and make it process commands that are transmitted
according to the ISO/IEC 14443 block transmission pro-
tocol. If, based on the ATQB response, the master
wants to communicate with the slave, the master must
put the slave into the ACTIVE state using the slave
selection command ATTRIB. The normal way for the
master to move a slave out of the ACTIVE state is by
sending a DESELECT command, which uses an
S-block to convey a network function command.
Figure 25 shows the format of the ATTRIB request
frame. The data to be used in the PUPI field must
match the PUPI information that the slave has transmit-
ted in the ATQB response. Param 1 tells the slave how
much time the master needs to switch from transmit to
receive (TR0), how much time the master needs to syn-
chronize to the slave’s subcarrier (TR1), and whether
the master is capable of receiving response frames
without SOF and/or EOF.
The MAX66020 ignores the data of Param 1. To ease
requirements for ISO/IEC 14443 Type B readers, the
MAX66020 has TR0 and TR1 fixed at 128/fs (151μs; fs
is the subcarrier frequency of 847.5kHz) and always
begins and ends its responses with SOF and EOF,
respectively.
SOF
COMMAND
PUPI
PARAM 1
PARAM 2
PARAM 3
PARAM 4
HLINF
CRC
EOF
1Dh
(4 BYTES)
(1 BYTE)
(1 BYTE)
01h
(1 BYTE)
( ≥ 0 BYTES) (2 BYTES)
Figure 25. ATTRIB Request Frame
20
______________________________________________________________________________________
相关PDF资料
MAX66040K-000AA+ ISO CARD SECURE MEMORY
MAX6605MXK/V+T IC TEMP SENSOR ANLG LP SC70-5
MAX6608IUK+T IC TEMP SENSOR ANLG SOT23-5
MAX66100K-000AA+ IC RFID UID 64BIT TYPE B KEY FOB
MAX6611AUT+T IC TEMP SENS LOW PWR SOT23-6
MAX66120K-000AA+ IC RFID UID 1KB TYPEB MEM KEYFOB
MAX6612MXK+T IC TEMP SENSOR ANLG SC70-5
MAX6613MXK+TCA3 IC ANLG TEMP SENSOR SC70-5
相关代理商/技术参数
MAX66020K-00AA+ 制造商:Maxim Integrated Products 功能描述:ISO/IEC 14443 TYPE B-COMPLIANT 1KB MEMORY FOB - Rail/Tube
MAX6602UE9A+ 功能描述:板上安装温度传感器 5Ch Precision Temperature Monitor RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6602UE9A+T 功能描述:板上安装温度传感器 5Ch Precision Temperature Monitor RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6603ATB 制造商:Maxim Integrated Products 功能描述:DUAL-CHANNEL PLATINUM RTD-TO-VOLTAG - Rail/Tube
MAX6603ATB+ 制造商:Maxim Integrated Products 功能描述:RTD TO VOLT SGNL CONDITIONER 10TDFN EP - Rail/Tube
MAX6603ATB+T 功能描述:板上安装温度传感器 RTD-to-Voltage Signal Conditioner RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6603ATB-T 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6603EVKIT 功能描述:板上安装温度传感器 Evalution Kit for MAX6603 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor